It is the procedure of repairing a house or residential or commercial property to its pre loss condition. Damage to the property could be because of an overflow, flood or other water damage event. The water damage repair procedure involves several key procedures like loss evaluation, categorization based on the water contamination levels, decontaminating and drying the structure, tracking of the procedure and conclusion of the procedure. There are two large licensing bodies, particularly the IICRC (Institute of Assessment, Cleaning and Restoration Certification) and the RIA (Remediation Market Association) that recommends requirements for water damage restoration. The S500 damage due to water guide is the benchmark tool that is used by business that focus on repair of water damage.

Loss Assessment and Categorization

Loss assessment is the first and the most essential step in water damage repair. The assessment has to be correct so that a proper response can be taken. In restoration the damage brought on by water, service technicians and the insurer need to interact and comprehend what is damaged and how to tackle bring back the damage. Recognizing the source of the damage, paperwork of damage, and accurate quotes are necessary for an appropriate water damage remediation. Categorization is based upon the contamination levels of the water source. The categories are listed below

Category 1 – This is water from clean sources like pipelines, sinks and toilets without faeces or urine.

Category 2 – This is water that has some impurities like water from a dishwasher, washing machine or toilet with urine.

Category 3 – This is water that is highly unhygienic and can triggering disease or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial development and floodwater are some examples.

Decontamination and Drying

After the assessment is total, the process of drying and decontaminating starts at the site. Based on the degree of damage, damage triggered due to water can be classified into 4 types. Class 1 Damage- When loss is restricted to a little location and less water has actually been soaked up by materials. This results in slow evaporation rate. Class 2 Damage – When the damage is to the entire space and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are many deep saturation pockets. Decontamination and drying is a key phase in Water damage repair and equipment like blowers, dehumidifiers, scrubbers and subfloor drying equipment have to be utilized. Decontamination needs to be done if contamination has been identified in the area. Decontamination may be provided for the entire area or in specific pockets where contamination has been identified.


Tracking and Conclusion

Keeping track of the restoration procedure of damage triggered due to damage is vital to attain the wanted outcomes. One has to be proactive throughout the monitoring process. Examining if the drying devices is setup appropriately, examining if the personnel involved are gotten approved for the job and checking if the equipment remain in working order are all part of the tracking process. Essential actions are to be taken if anything wrong is spotted throughout the monitoring process. The entire process of water damage restoration would be categorized as total only as soon as the humidity, temperature level and the moisture material is based on market standards. Upon conclusion of the water damage restoration process, the drying devices can be eliminated.